Civil Engineering / Research & Consulting / Publications / 1996-2000

1996 Publications

Books and Book Chapters | Journal Papers | Conference Papers
Research Reports | Higher Degree Theses

Books and Book Chapters

  • Karihaloo BL, Andreasen JH (1996) Mechanics of Transformation Toughening and Related Topics. Elsevier, Amsterdam, Holland.
  • Hancock GJ, Syam A, Chapman B, Hogan T (1996) Connections in Steel Structures III. Connection research, design and practice in Australia. R Bjorhovde, A Colson, R Zandonini, Pergamon, Oxford, UK, 563-575.
  • Small JC, Ng KLA, Hsi JP (1996) Mechanics of Poroelestic Media. Excavation and construction problems involving porous media. P Selvadurai, Kluwer Academic Publishers, London, UK, 181-195.
  • Zhao XL, Hancock GJ (1996) Connections in Steel Structures III. Welded connections in thin cold-formed rectangular hollow sections. R Bjorhovde, A Colson, R Zandonini, Pergamon, Oxford, UK, 89-98.
Back to Top

Journal Papers

  • Abel A, Chen X, Jin S, Wu S (1996) Cyclic plasticity behaviour of 2014-T6 aluminium alloy under nonproportional loading. La Revue de Metallurgie, February 1996, 255-260.
  • Bernard ES, Bridge RQ, Hancock GJ (1996) Design methods for profiled steel decks with intermediate stiffeners. Journal of Constructional Steel Research, 38, No 1, 61-68.
  • Bernard ES, Bridge RQ, Hancock GJ (1996) Flange curling in profiled steel decks. Thin-Walled Structures, 25, No 1, 1-29.
  • Booker JR (1996) Part II: Heat flow and contaminant migration in soils. Australian Geomechanics, 29, 14-36.
  • Brown PT (1996) Screw plate field testing for modules of sand. Australian Geomechanics, No 30, 69-75.
  • Chen X, Gao H, Abel A, Wu S (1996) Evaluation of low cycle fatigue under non-proportional loading. Fatigue and Fracture of Engineering Materials and Structures, 19, No 10, 1161-1168.
  • Chin JT, Poulos HG (1996) Tests on model jacked piles in calcareous sand. Geotechnical Testing Journal, 19, 164-180.
  • Denoon RO, Kwok KCS (1996) Full-scale measurements of wind-induced response of an 84 m High Concrete Control Tower. Journal of Wind Engineering and Industrial Aerodynamics, 60,
    155-165.
  • Fernando NSM, Small JC, Carter JP (1996) Elastic analysis of buried structures subject to three-dimensional surface loading. International Journal for Numerical and Analytical Methods in Geomechanics, 20, 331-349.
  • Gizejowski MA, Papangelis JP (1996) An Australian system of light weight steel framed buildings for one-family housing. Polish Technical and Informative Bulletin - Steel Structure, 12, 15-19.
  • Glanville MJ, Kwok KCS, Denoon RO (1996) Full-scale damping measurements of structures in Australia. Journal of Wind Engineering and Industrial Aerodynamics, 59, 349-364.
  • Han SH, Adamu A, Karihaloo BL (1996) Minimum cost design of multispan partially prestressed concrete beams using DCOC. Engineering Optimisation, 26, 35-59.
  • Han SH, Adamu A, Karihaloo BL (1996) Minimum cost design of multispan partially prestressed concrete T-beams using DCOC. Structural Optimisation, 12, 75-86.
  • Hubble TC, Hull TS (1996) A model for bank collapse on the Nepean River, Camden Valley, NSW. Australian Geomechanics, 80-98.
  • Jaafari A (1996) Twinning time and cost in incentive-based contracts. ASCE Journal of Management in Engineering, 12, 62-72.
  • Jaafari A (1996) Human factors in the Australian construction industry: Towards total quality management. Australian Journal of Management, 21, 159-185.
  • Jaafari A (1996) Time and priority allocation scheduling technique for projects. International Journal of Project Management, 14, 289-299.
  • Jaafari A, Filinov NB (1996) Re-engineering the productivity initiative programme. International Journal of Project Management, 14, 395-403.
  • Jones ISF (1996) Enhanced carbon dioxide uptake by the world's oceans. Energy Conversion and Management, 37, 1049-1052.
  • Karihaloo BL (1996) Pull-out of axisymmetric headed anchors. Materials and Structures, 29,
    152-157.
  • Karihaloo BL, Wang JC, Grzybowski M (1996) Doubly periodic arrays of bridged cracks and short fibre-reinforced cementations composites. Mechanics Physics Solids, 44, No 10, 1565-1586.
  • Lange Kornbak D, Karihaloo BL (1996) Design of concrete mixes for minimum brittleness. Journal of Advanced Cement Based Materials, 124-132.
  • Leo CJ, Booker JR (1996) A time-stepping finite element method for analysis of contaminant transport in fractured porous media. International Journal for Numerical and Analytical Methods in Geomechanics, 20, 847-864.
  • Liang SG, Hitchcock PA (1996) Experimental investigation of circle shaped TLCD (in Chinese). Special Structures, 3, 33-35.
  • Makarchian M, Poulos HG (1996) Simplified method for design of underpinning piles. Journal of Geotechnical Engineering, American Society of Civil Engineers, 122, 745-751.
  • Moghaddas Nejad F, Small JC (1996) The effects of geogrid reinforcement in single and multiple track tests on pavements. Journal of Transportation Engineering ASCE, 122, 468-474.
  • Møeller CV, Andreasen JH, Karihaloo BL (1996) Improved endurance limit of zirconia ceramics by overloading. Journal of American Ceramics Society, 79, 2500-2502.
  • Møeller CV, Karihaloo BL (1996) Arrest of fatigue cracks in transformation-toughened ceramics. Journal of the American Ceramic Society, 79, 655-658.
  • Pi YL, Trahair NS (1996) Three dimensional nonlinear analysis of elastic arches. Engineering Structures, 18, No 1, 49-63.
  • Pi YL, Trahair NS (1996) In-plane inelastic buckling and strengths of steel arches. Journal of Structural Engineering, 122, No 7, 734-747.
  • Pilgrim LJ (1996) Monitoring surface shape variation on the human body. Australasian Physical and Engineering Sciences in Medicine, 19, 1, 7-19.
  • Pilgrim LJ (1996) Robust estimation and surface differencing. ISPRS Journal of Photogrammetry and Remote Sensing, 51, 243-257.
  • Pilgrim LJ (1996) Surface matching and difference detection without the aide of control points. Survey Review, 33, 259, 291-304.
  • Poulos HG, Chen LT (1996) Pile response to unsupported excavation - induced lateral soil movement. Canadian Geotechnical Journal, 33, 670-677.
  • Santhikumar S, Karihaloo BL (1996) Time-dependent tension softening. Mechanics of Cohesive-Frictional Materials, 1, 295-304.
  • Showkati H, Ansourian P (1996) Influence of primary boundary conditions on the bucking of shallow cylindrical shells. Journal of Constructional Steel Research, 36, No 1, 53-75.
  • Smith DW, Booker JR (1996) Boundary element analysis of linear thermoelastic consolidation. International Journal for Numerical and Analytical Methods in Geomechanics, 20, 457-488.
  • Southcott PH, Small JC (1996) Finite layer analysis of piles and pile groups. Computers and Geotechnics, 18, 47-63.
  • Sully RM, Hancock GJ (1996) Behaviour of cold-formed SHS beam-columns. Journal of Structural Engineering, 122, No 3, 326-336.
  • Ta LD, Small JC (1996) Analysis of piled raft systems in layered soils. International Journal for Numerical and Analytical Methods in Geomechanics, 20, 57-72.
  • Thomsen NB, Karihaloo BL (1996) Enhanced wear performance of transformation toughened ceramics by microstructural optimisation. Journal of Tribology, 118, 740-746.
  • Thomsen NB, Karihaloo BL (1996) Subsurface and surface cracks under contact loading in transformation-toughened ceramics. Journal Mechanics Physics Solids, 44, No 2, 207-231.
  • Trahair NS (1996) Laterally unsupported beams. Engineering Structures, 18, No 10, 759-768.
  • Trahair NS, Pi YL (1996) Simplified torsion design of compact I-beams. Steel Construction, 30,
    No 1, 2-19.
  • Verruijt A, Booker JR (1996) Surface settlements due to deformation of a tunnel in an elastic half plane. Geotechnique, 46, No 4, 753-756.
  • Vodenitcharova T, Ansourian P (1996) Buckling of circular cylindrical shells subject to uniform lateral pressure. Engineering Structures, 18, No 8, 604-614.
  • Wang JC, Karihaloo BL (1996) Mode I stress singularity and intensity factor at a crack tip terminating at a transversely isotropic-orthotropic bimaterial interface. International Journal of Fracture, 74, 325-340.
  • Wang JC, Karihaloo BL (1996) Optimum in situ strength design of composite laminates. Part I: In situ strength parameters. Journal of Composite Materials, 30, No 12, 1314-1337.
  • Wang JC, Karihaloo BL (1996) Optimum in situ strength design of composite laminates. Part II: Optimum design. Journal of Composite Materials, 30, No 12, 1338-1358.
Back to Top

Conference Papers

  • Airey D, Carter JP, Ghafoori M (1996) The deformation and strength properties of intact Ashfield Shale. Proceedings, 7th Australia New Zealand Conference on Geomechanics. The Institution of Engineers Australia, Canberra, 48-53.
  • Andreasen JH, Karihaloo BL (1996) Steady state analysis of an array of semi-infinite edge cracks in a transformation toughening ceramic. Proceedings, 11th Biennial European Conference on Fracture - Mechanisms and Mechanics of Damage and Failure. Engineering Materials Advisory Services Ltd, UK, 139-144.
  • Ansourian P (1996) Causes of structural failures on balance of probabilities. Proceedings, 6th International Conference on Lessons from Structural Failures. Milos F Drdacky, Prague, Chech Republic, 1, 12-20.
  • Brown PT, Reyno AJ (1996) A modified screw plate. Proceedings, 7th Australia New Zealand Conference on Geomechanics. The Institution of Engineers Australia, Canberra, 1,
    874-878.
  • Carter JP (1996) Numerical methods in geotechnical engineering - from research to practice. Proceedings, 7th New Zealand Conference on Geomechanics. The Institution of Engineers Australia, Canberra, 441-470.
  • Chen LT, Poulos HG (1996) Some aspects of pile response near an excavation. Proceedings, 7th Australia - New Zealand Conference on Geomechanics. Institution of Engineers Australia, Canberra, 1, 604-609.
  • Chen X, Abel A (1996) Multiaxial ratchetting for 2014-T6 aluminium alloy tube. Proceedings, 7th International Symposium on Tubular Structures. A Balkema, Rotterdam, 271-275.
  • Chin JT, Poulos HG (1996) Cyclic model pile tests in calcareous sand. Proceedings, 12th Southeast Asian Geotechnical Conference. Institution of Engineers, 1, 447-452.
  • Clarke MJ, Bridge RQ (1996) The design of steel frames using the notional load approach. Proceedings, 5th International Colloquium on Stability of Metal Structures, North American Session. Structural Stability Research Council, Bethlehem, PA, USA, 33-42.
  • Denoon RO (1996) Dynamic characteristics of the Sydney Airport Control Tower. Proceedings, 5th Workshop on Wind Engineering. CSIRO Australia, 1-4.
  • Fernando NSM, Carter JP, Small JC (1996) Prediction of live load effects on buried corrugated metal structures. Prediction of Live Load Effects on Buried Corrugated Metal Structures. The Institution of Engineers Australia, 1, 489-494.
  • Gao H, Kwok KCS Samali B (1996) Soil-structural interaction in structural vibration induced by wind. Proceedings, 5th Australian Wind Engineering Society Workshop. Australian Wind Engineering Society, Tanunda, South Australia, Session D.
  • Gao H, Samali B, Kwok KCS (1996) Structural vibration control by passive dampers considering soil-structure interaction. Proceedings, 2nd International Workshop on Structural Control. The Hong Kong University of Science and Technology, Hong Kong, 1, 174-185.
  • Gao H, Samali B, Kwok KCS (1996) Soil-structure-damper interaction in structural vibration induced by wind. Proceedings, 3rd International Conference on Motion and Vibration Control. The Japan Society of Mechanical Engineers, 1, 76-81.
  • Glanville MJ, Hitchcock PA, Kwok KCS (1996) Twenty LCVAs and a steel tower. 3rd International Colloquium on Bluff Body Aerodynamics and Applications. Virginia Polytechnic Institute and State University, USA, BIX13-BXI14.
  • Glanville MJ, Kwok KCS (1996) Full scale, model and numerical comparisons of wind flow over a steep escarpment. 3rd International Colloquium on Bluff Body Aerodynamics and Applications. Virginia Polytechnic Institute and State University, USA, CIV-9, CIV-10.
  • Glanville MJ, Kwok KCS (1996) Further development of the blockage tolerant wind tunnel concept. 3rd International Colloquium on Bluff Body Aerodynamics and Applications. Virginia Polytechnic Institute and State University, Virginia, CVII5-CVII6.
  • Glanville MJ, Kwok KCS (1996) Further development of the blockage tolerant wind tunnel concept. Proceedings, 5th Australian Wind Engineering Society Workshop. Australian Wind Engineering Society, Tanuda, South Australia, Session D.
  • Hancock GJ, Celeban M, Popovic D (1996) Comparison of tests of purlins with and without cleats. Proceedings, 13th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri-Rolla, USA, 155-175.
  • Hancock GJ, Davids A, Go E (1996) Developments in the new cold-formed steel structures code. Proceedings, National Engineering Conference, The Darwin Summit. The Institution of Engineers Australia, Canberra, 95-101.
  • Hancock GJ, Murray T (1996) Residential applications of cold-formed structural members in Australia. Proceedings, 13th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri-Rolla, USA, 505-511.
  • Hancock GJ, Rogers CA, Schuster RM (1996) Comparison of the distortional buckling method for flexural members with tests. Proceedings, 13th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri Rolla, Missouri, USA, 125-139.
  • Hancock GJ, Trahair NS (1996) Limit states design and testing of steel structures in Australia. Proceedings, International Workshop on NDT and Safety. Yeungnam University, Kyongsan, Korea, 1, 17-32.
  • Hitchcock PA, Glanville MJ, Kwok KCS (1996) Damping properties and wind induced response of a steel frame tower fitted with liquid column vibration absorbers. Proceedings, 5th Australian Wind Engineering Society Workshop. Australian Wind Engineering Society, Tanunda, South Australia, Session E.
  • Hoare T, Samali B, Kwok KCS (1996) Active tuned mass dampers - Practicality and costing details. Proceedings, 3rd International Conference on Motion and Vibration Control. The Japan Society of Mechanical Engineers, Japan, III, 227-232.
  • Holmes JD, Sankaran R, Kwok KCS, Syme MJ (1996) Eigenvector modes of fluctuating external and internal pressures on a low-rise building model. 3rd International Colloquium on Bluff Body Aerodynamics and Applications. Virginia Polytechnic Institute and State University, USA,
    AXI15-AXI18.
  • Hosking IA, Best RJ, Booker JR, Stephens BA (1996) Using a site specific, risk based approach to design and reduce the cost of landfill liners. Proceedings, Waste Management Conference. Australian Water & Wastewater Association Incorporated, Sydney, NSW, 567-573.
  • Itakura T, Airey D, Duxbury T (1996) Microbiological assessment of a clay soil contaminated with methyl ethyl ketone. Proceedings, 7th Australia New Zealand Conference on Geomechanics. The Institution of Engineers Australia, Canberra, 797-801.
  • Jaafari A (1996) Real time planning and total risk management. Proceedings, 3rd ASCE Congress on Computing in. American Society of, New York, USA, 1, 193-199.
  • Jaafari A (1996) An integrated intelligent system for total planning and risk management of projects. Proceedings, INCIT'96, International Construction Information Technology Conference. The Institution of Engineers Australia and NATSPEC, Sydney, NSW, 1, 123-130.
  • Jaafari A (1996) Twinning time and cost in incentive-based contract, an innovative delivery concept for uncertain projects. Proceedings, IPMA, 96 World Congress on Project Management and 12th AFITEP Annual Meeting. AFITEP and International Project Management Association, Paris, France, 1, 525-534.
  • Jonaidi M, Ansourian, P (1996) Effects of differential settlement on storage tank shells. ICASS'96 Advances in Steel Structures. Pergamon, UK, 2, 821-826.
  • Jones ISF (1996) The Sydney waste water project - community pressures. Proceedings, Clean Sea'96. Japanese Ministry of Transport, Tokyo, Japan, 23-30.
  • Lav MA, Carter JP, Booker JR (1996) The bearing capacity of clays weakened by fissures. Proceedings, 7th Australian New Zealand Conference on Geomechanics. The Institution of Engineers Australia, Canberra, 532-537.
  • Liu MD, Carter JP, Airey D (1996) A plasticity model for cemented carbonate sediments. Proceedings, 2nd International Conference on Soft Soil Engineering. Hohai University Press, Nanjing, China, 1, 243-254.
  • Mackriell LE, Samali B, Kwok KCS (1996) Optimum parameters for active tuned mass dampers. Proceedings, 1st European Conference on Structural Control. World Scientific, Singapore-New Jersey-London-Hong Kong, 13, 435-442.
  • Mackriell LE, Samali B, Kwok KCS (1996) Optimum parameters for active tuned mass dampers. Proceedings, 1st European Conference on Structural Control. Barcelona, Spain.
  • Mackriell LE, Samali B, Kwok KCS (1996) Comparison of numerical verses analytical optimum parameters for active tuned mass dampers. Proceedings, 3rd International Conference on Motion and Vibration Control. The Japan Society of Mechanical Engineers, Japan, III, 473-478.
  • Makarchian M, Poulos HG (1996) A theoretical study of underpinning of rigid circular foundations by piles. Proceedings, 6th International Conference on Piling and Deep Foundations. Deep Foundations Institute, Mumbai, USA, 1, 1.16.1-1.16.6.
  • Moghaddas Nejad F, Small JC (1996) Geogrid reinforcement of pavements. Geogrid Reinforcement of Pavements. The Institution of Engineers Australia, Canberra, 1, 129-133.
  • Poulos HG (1996) A comparison of some methods for the design of piles through embankments. Proceedings, 12th Southeast Asian Geotechnical Conference. Institution of Engineers, Kuala Lumpur, Malaysia, 2, 157-167, Special lecture.
  • Poulos HG (1996) Measured and predicted settlements of shallow foundations on sand. Proceedings, 7th Australia - New Zealand Conference on Geomechanics. Institution of Engineers Australia, Canberra, 1, 686-692.
  • Poulos HG (1996) Professional issues - General Report. Proceedings, 7th Australia - New Zealand Conference on Geomechanics. Institution of Engineers Australia, Canberra, 1, 939-942.
  • Poulos HG (1996) The Warren Centre underground space project. Proceedings, 9th Australian Tunnelling Conference. Institution of Engineers Australia, Canberra, 1, 317-327, Keynote lecture.
  • Poulos HG, Love DN, Grounds RW (1996) Seismic zonation of the Adelaide area. Proceedings, 7th Australia - New Zealand Conference on Geomechanics. Institution of Engineers Australia, Canberra, 1, 331-342.
  • Poulos HG, Tabesh A (1996) Seismic response of pile foundations - some important factors. Proceedings, 11th World Conference on Earthquake Engineering. Pergamon, Mexico, 1, 1384.
  • Rasmussen KJR (1996) Numerical simulation and computational models in coupled instabilities. Proceedings, Coupled Instabilities in Metal Structures CIMS'9. Imperial College Press, London, UK, 45-60.
  • Rasmussen KJR, Hasham AS (1996) Flexural and flexural-torsional bifurcation of locally buckled beam-columns. Proceedings, Bicentenary Conference of the University of Strathclyde on Thin-walled Structures. University of Strathclyde, Glasgow, UK, 1-25.
  • Rasmussen KJR, Rondal J (1996) An explicit approach to design of stainless steel columns. Proceedings, 13th International Specialty Conference of Cold-formed Steel Structures. University of Missouri-Rolla, USA, 523-539.
  • Reid SG (1996) Strength and reliability of reinforced concrete columns with sustained loading. Proceedings, 7th Specialty Conference on Probabilistic Mechanics and Structural Reliability. American Society of Civil Engineers, NY, USA, 234-237.
  • Reid SG, Lee DS (1996) Reliability-based pattern loads for design. Proceedings, Asian-Pacific Symposium on Structural Reliability and its Applications. APSSRA95, Japan, 1995, 132-138.
  • Rogers CA, Schuster RM (1996) Cold formed steel flat width ratio limits, d/t and di/w. Proceedings, 13th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri-Rolla, USA, 111-124.
  • Rogers CA, Schuster RM (1996) Effective width of a simple edge-stiffener subjected to a stress gradient. Proceedings, 13th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri Rolla, USA, 81-90.
  • Rogers CA, Schuster RM (1996) Interaction of flange/edge-stiffened cold formed steel C-sections. Proceedings, 13th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri Rolla, Missouri, USA, 103-110.
  • Rogers CA, Schuster RM (1996) Test results and comparison of cold formed steel edge-stiffened C-sections. Proceedings, Canadian Society for Civil Engineering, 1st Structural Specialty Conference. Canadian Society for Civil Engineering, Montreal, Quebec, Canada, IIb, 1033-1044.
  • Rousch C, Hancock GJ (1996) Determination of purlin R-factors using a non-linear analysis. Proceedings, 13th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri-Rolla, USA, 177-206.
  • Rufatt LM, Jones ISF (1996) American Geophysical Union. EOS, Transactions, Physical and Aerodynamic Roughness. Washington, USA, 77, W59-W59.
  • Samali B, Tapner D, Kwok KCS (1996) Practical design considerations in the use of tuned liquid column dampers. Proceedings, 3rd International Conference on Motion and Vibration Control. The Japan Society of Mechanical Engineers, Japan, II, 316-321.
  • Singh J, Airey D, Carter JP, Booker JR (1996) Model studies of the bearing capacity of an orthogonally jointed medium. Proceedings, 1st International Forum on Discontinuous Deformation Analysis. Berkeley, USA.
  • Sinha J, Poulos HG (1996) Behaviour of stiffened raft foundations. Proceedings, 7th Australia - New Zealand Conference on Geomechanics. Institution of Engineers Australia, Canberra, 1, 704-709.
  • Tabesh A, Poulos HG (1996) Response of piles to typical earthquakes. Proceedings, 7th Australia - New Zealand Conference on Geomechanics. Institution of Engineers Australia, Canberra, 1, 349-354.
  • Teh LH, Clarke MJ (1996) Co-rotational and lagrangian formulations for elastic spatial beam elements. International Conference on Advances in Steel Structures. Pergamon, UK, 1, 327-332.
  • Teh LH, Clarke MJ (1996) An alternative representation of conservative internal moments in space frames. International Conference on Advances in Steel Structures. Pergamon, UK, 1, 321-326.
  • Thomsen NB, Karihaloo BL (1996) Near surface cracks in transformation toughened ceramics subjected to hertzian contact load. Proceedings, IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials. Kluwer Academic Publishers, Holland, 413-420.
  • Toba Y, Jones ISF, Ebuchi N, Kawamura H (1996) The role of gustiness in determining the aerodynamic roughness of the sea surface. Proceedings, The Air-Sea Interface. University of Toronto Press, Toronto, 407-412.
  • Trahair NS, Pi YL, Clarke MJ, Papangelis JP (1996) Plastic design of steel arches. Proceedings, International Conference on Advances in Steel Structures. Pergamon, UK, 1, 13-22.
  • Vodenitcharova T, Ansourian (1996) Non-uniform lateral pressure solutions for containment vessels. Proceedings, ICASS'96 Advances in Steel Structures. Pergamon, UK, 2, 753-758.
  • Won GW, Hull TS, De Ambrosis L (1996) Performance of a geosynthetic segmental block wall structure to support bridge abutments. Proceedings, International Symposium on Earth Reinforcement is Kyushu'96. Balkema, Rotterdam, Holland, 543-548.
  • Xiao B, Carter JP (1996) Analysis of deep basement excavations in jointed rocks. Proceedings, 7th New Zealand Conference on Geomechanics. The Institution of Engineers Australia, Canberra,
    246-251.
  • Yeoh CK, Airey DW (1996) The response of footings on artificially cemented soil. Proceedings, 7th Australia New Zealand Conference on Geomechanics. The Institution of Engineers Australia, Canberra, 720-725.
  • Young B, Rasmussen KJR (1996) Behaviour of fixed-ended and pin-ended cold-formed lipped channel columns. Proceedings, Coupled Instabilities in Metal Structures CIMS'96. Imperial College Press, London, 157-164.
  • Young B, Rasmussen KJR (1996) Design of fixed-ended cold-formed plain channel columns. Proceedings, Coupled Instabilities in Metal Structures CIMS'96. Pergamon, London, 145-150.
  • Young B, Rasmussen KJR (1996) Elastic bifurcation of locally buckled plain channel columns. Proceedings, Coupled Instabilities in Metal Structures CIMS'96. Imperial College Press, London, UK, 93-100.
Back to Top